Elite Robots CS63

Elite Robots CS63 is a six-axis collaborative arm from Elite Robots of Suzhou, carrying 3 kg over a 624 mm radius with a repeatability of +/-0.02 mm. It weighs 15 kg, stands on a 128 mm base and draws 185 W in typical use. Every one of its six joints turns +/-360 degrees, which is unusual: most competing arms restrict at least one axis. Joint speeds are 180 deg/s at the first two axes, 230 deg/s at the third and 230 deg/s at the wrist, giving a typical tool-point speed of 2.0 m/s. A single tool connector (M8, 8-pin) carries 4 configurable digital inputs, 4 configurable digital outputs, one analogue input and one analogue output, with 0/12/24 V available at 3 A, 2 A and 1 A respectively. The arm carries an IP65 rating as standard with IP68 available as an option, works from -10 to 50 C and up to 90% relative humidity without condensation, and is certified to ISO 13849. Tool-side communication is RS485 with Modbus RTU. The AC control cabinet is shared across the family: 505 x 257 x 462 mm, IP44, running from 100-240 V at 50-60 Hz, with 24 digital inputs and 24 digital outputs of which eight are safety-configurable, two analogue inputs, two analogue outputs and four high-speed digital inputs. Fieldbus support covers RS485, Ethernet TCP/IP, Modbus TCP and RTU, and EtherNet/IP and Profinet in slave mode. Programming runs from the ERP400 pendant - a 12.1-inch 1280 x 800 touchscreen, IP54, 1.7 kg on a 5.5 m cable. The CS series was released in 2022; the manufacturer states this in its own press material. Web archive snapshots corroborate the sequence: the product listing of 31 March 2023 shows exactly three CS models - CS63, CS66 and CS612 - with the larger arms absent. Elite Robots publishes no list price for this arm; it is sold through the manufacturer and its distributors.

▸Videos

No videos yet.

▸Reviews